Tag Archives: san

EMC’s New VNX Unified Storage Systems

Posted on by

Today, EMC announced the new VNX and VNXe Unified Storage platforms that merge the functionality of, and replaces, EMC’s popular Clariion and Celerra products.   VNX is faster, more scalable, more efficient, more flexible, and easier to manage than the platforms it replaces.

Key differences between CX4/NS and VNX:

  • VNX replaces the 4gb FC-Arbitrated Loop backend busses with 6gb SAS point-to-point switched backend.
    • Fast and Reliable
  • VNX supports both 3.5” and 2.5” SAS drives in EFD (SSD), SAS, and NearLine-SAS varieties.
    • Flexible and Efficient
  • VNX has more cache, more front-end ports, and faster CPUs
    • Fast and Flexible
  • VNX systems can manage larger FASTCache configurations.
    • Fast and Efficient
  • VNX builds on the management simplicity enhancements started in EMC Unisphere on CX4/NS by adding application aware provisioning.
    • Simple and Efficient
  • VNX allows you to start with Block-only or NAS-only and upgrade to Unified later if desired, or start with Unified at deployment.
    • Cost Effective and Flexible
  • VNX will support advanced data services like deduplication in addition to FASTVP, FASTCache, Block QoS, Compression, and other features already available in Clariion and Celerra.
    • Flexible and Efficient

Just as with every manufacturer, newer products take advantage of the latest technologies (faster Intel processors and SAS connectivity in this case,) but that’s only part of the story with VNX.

Earlier, I mentioned Application Aware Provisioning has been added to Unisphere:

Prior to Application Aware Unisphere, if tasked with provisioning storage for Microsoft Exchange (for example), a storage admin would take the mailbox count and size requirements, use best practices and formulas from Microsoft for calculating required IOPS, and then map that data to the storage vendors’ best practices to determine the best disk layout (RAID Type, Size, Speed, quantity, etc).  After all that was done, then the actual provisioning of RAID Groups and/or LUNs would be done.

Now with Application Aware Unisphere, the storage admin simply enters the mailbox count and size requirements into Unisphere and the rest is done automatically.  EMC has embedded the best practices from Microsoft, VMWare, and EMC into Unisphere and created simple wizards for provisioning Hyper-V, VMWare, NAS, and Microsoft Exchange storage using those best practices.

Combine Unisphere’s Application Aware Provisioning with the already included vCenter integration, and support for VMWare VAAI and you have a broad set of integration from the application layer down through to the storage system for optimum performance, simple and efficient provisioning, and unparalleled visibility.  This is especially useful for small to medium sized businesses with small IT departments.

EMC has also simplified licensing of advanced features on VNX.  Rather than licensing individual software products based on the exact features you want, VNX has 5 simple Feature Packs plus a few bundle packs.  The packs are created based on the overall purpose rather than the feature.  ie: Local Protection vs. Snapshots or Clones

  • FAST Suite includes FASTVP, FASTCache, Block QoS, and Unisphere Analyzer
  • Security and Compliance Pack includes File Level Retention for File and Block Encryption
  • Local Protection Pack includes Snapshots for block and file, full copy clones, and RecoverPoint/CDP
  • Remote Protection Pack includes Synchronous and Asynchronous replication for block and file as well as RecoverPoint/CRR for near-CDP remote replication of block and.or file data.
  • Application Protection Pack extends the application integration by adding Replication Manager for application integrated replication and Data Protection Advisor for SLA based replication monitoring and reporting.

You can also get the Total Protection Pack which includes Local Protection, Remote Protection, and Application Protection packs at a discounted cost or the Total Efficiency Pack which includes all five.  That’s it, there are no other software options for VNX/VNXe.  Compression and Deduplication are included in the base unit as well as SANCopy.  You will also find that the cost of these packs is extremely compelling once you talk with your EMC rep or favorite VAR.

So there you have it — powerful, simple and efficient storage, unified management, extensive data protection features, simplified licensing, and class leading functionality (FASTVP, FASTCache, Integrated CDP, Quality of Service for Block, etc) in a single platform.  That’s Unified, That’s EMC VNX.

I didn’t have time to touch on VNXe here but there is even more cool stuff going on there.  You can read more about these products here..

Using Cloud as a SAN Tier?

Posted on by

I came across this press release today from a company that I wasn’t familiar with and immediately wanted more information.  Cirtas Systems has announced support for Atmos-based clouds, including AT&T Synaptic Storage.  Whenever I see these types of announcements, I read on in hopes of seeing real fiber channel block storage leveraging cloud-based architectures in some way.  So far I’ve been a bit disappointed since the closest I’ve seen has been NAS based systems, at best including iSCSI.

Cirtas BlueJet Cloud Storage Controller is pretty interesting in its own right though.  It’s essentially an iSCSI storage array with a cache and a small amount of SSD and SAS drives for local storage.  Any data beyond the internal 5TB of usable capacity is stored in “the cloud” which can be an onsite Private Cloud (Atmos or Atmos/VE) and/or a Public Cloud hosted by Amazon S3, Iron Mountain, AT&T Synaptic, or any Atmos-based cloud service provider.

Cirtas BlueJet

The neat thing with BlueJet is that it leverages a ton of the functionality that many storage vendors have been developing recently such as data de-duplication, compression, some kind of block level tiering, and space efficient snapshots to improve performance and reduce the costs of cloud storage.  It seems that pretty much all of the local storage (SAS, SSD, and RAM) is used as a tiered cache for hot data.  This gives users and applications the sense of local SAN performance even while hosting the majority of data offsite.

While I haven’t seen or used a BlueJet device and can’t make any observations about performance or functionality, I believe this sort of block->cloud approach has pretty significant customer value.  It reduces physical datacenter costs for power and cooling, and it presents some rather interesting disaster recovery opportunities.

Similar to how Compellent’s signature feature, tiered block storage, has been added to more traditional storage arrays, I think modified implementations of Cirtas’ technology will inevitably come from the larger players, such as EMC, as a feature in standard storage arrays.  If you consider that EMC Unified Storage and EMC Symmetrix VMAX both have large caches and block- level tiering today, it’s not too much of a stretch to integrate Atmos directly into those storage systems as another tier.  EMC already does this for NAS with the EMC File Management Appliance.

Conceptual Diagram

I can imagine leveraging FASTCache and FASTVP to tier locally for the data that must be onsite for performance and/or compliance reasons and pushing cold/stale blocks off to the cloud.  Additionally, adding cloud as a tier to traditional storage arrays allows customers to leverage their existing investment in Storage, FC/FCoE networks, reporting and performance trending tools, extensive replication options available, and the existing support for VMWare APIs like SRM and VAAI.

With this model, replication of data for disaster recovery/avoidance only needs to be done for the onsite data since the cloud data could be accessed from anywhere.  At a DR site, a second storage system connects to the same cloud and can access the cold/stale data in the event of a disaster.

Another option would be adding this functionality to virtualization platforms like EMC VPLEX for active/active multi-site access to SAN data, while only needing to store the majority of the company’s data once in the cloud for lower cost.  Customers would no longer have to buy double the required capacity to implement a disaster recovery strategy.

I’m eagerly awating the implementation of cloud into traditional block storage and I can see how some vendors will be able to do this easily, while others may not have the architecture to integrate as easily.  It will be interesting to see how this plays out.

EMC, Isilon, and CSX possibilities..

Posted on by

As you’ve no doubt heard, EMC has completed the tender offer to acquire Isilon (www.isilon.com)  for a Cajillion dollars (actually ~$2 Billion) and some people are asking why.  From where I sit, there are many reasons why EMC would want a company like Isilon, ranging from it’s media-minded customer base, to the technical IP, like scale-out NAS, that sets Isilon apart from the rest.

This EMC Press Release, as well as this one, and Chucks Blog are some of the many places to find out more about the acquisition…

I was thinking a lot about that technology as I worked on a high-bandwidth NAS project with a customer recently.  Isilon’s primary product is an IP-based storage solution that uses commodity based hardware components, combined with their proprietary OneFS Operating System, to deliver scale-out NAS with super simple management and scalability.  A single Isilon OneFS based filesystem can scale to over 10PB across hundreds of nodes.  Isilon also provides various versions of hardware that can be intermixed to increase performance, capacity, or both depending on customer needs.  You don’t necessarily have to add disks to an Isilon cluster to increase performance.

When looking at EMC’s own product line, you’ll find that Atmos delivers similar scale-out clustering for object-based storage, while VMAX does a similar type of scaling for high-end block storage (FC, FCoE, and iSCSI), and Greenplum provides scale-out analytics as well.  Line up Isilon’s OneFS, EMC GreenPlum, EMC Atmos, and EMC VMAX, and we can now deliver massive scale-out storage for database, object, file, and block data.  With VPLEX and Atmos, EMC also delivers block and object storage federation across distance.

Isilon’s OneFS also has technologies that mirror EMC’s but are implemented in such a way as to leverage the Scale-Out NAS model.  Take FlexProtect, for example, which is Isilon’s data protection mechanism (similar to RAID) and allows admins to apply different protection schemes (N+1 ala RAID5, N+2 ala RAID6, N+3, and even N+4 redundancy) on individual files and directories.  SmartPools, which is policy based, automatically tiers data at a file level based on read/write activity across different protection types and physical nodes, similar to how FASTVP tiers data at a block level on EMC Unified and VMAX.  Both EMC and Isilon realize that all data is not equal.

Rather than just repackage OneFS with an EMC logo (which I’m sure we’ll do at first), I wonder what else can we do with Isilon’s IP…

A recent series of blog posts by Steve Todd (Information Playground) on the topic of a Common Software Execution Environment (See CSX Technology and The Benefits of Component Assembly) got me thinking about deeper integration and how CSX can accelerate that integration.

For example…

What if EMC Engineering took the portions of code from Isilon’s OneFS that handle client load-balancing, file-level automated tiering, and flexible protection and turned them into CSX components.  Those components could be dropped into Celerra and immediately add Scale-Out NAS to EMC’s existing Unified storage platforms.  Or, imagine those components running directly in VMAX engines, providing scale-out NAS simultaneously with scale-out SAN across multiple, massive scale storage systems.  Combine the load balancing code and FlexProtect from Isilon with FASTVP in EMC Clariion to provide scale-out SAN in a midrange platform.

We could also reverse the situation and use the compression component that is in Clariion and Celerra, plus federation technology in Atmos, both added to OneFS in order reduce the storage footprint and extend Scale-Out NAS to many sites over any distance.  Add a GreenPlum component and suddenly you have a massive analytics cluster that spans multiple sites for data where you need it, when you need it.

The possibilities here really are endless, it will be very interesting to see what happens over the next 12 to 24 months.

Disclaimer: Even though I am an EMC employee, I am in no way involved in the EMC/Isilon acquisition, have no knowledge of future plans and roadmaps with regard to EMC and Isilon, and am not privy to any non-public information about this topic.  I am merely expressing my own personal views on this topic.

Unified of the Beholder???

Posted on by

Apart from “The Cloud”, “Unified Storage” is the other big buzzword in the storage industry of late.  But what exactly is Unified Storage?

Mirriam-Webster defines unify as “to make into a unit or coherent whole

So how does this apply to storage systems?  If you look at marketing messages by EMC, NetApp, and other vendors you’ll find that they all use the term in different ways in order to fit nicely with the products they have.  Based on what I see, there are generally two different approaches.

Single HW/SW Stack Approach:

Some vendors want you to believe that the only way it can be called Unified Storage is if the same physical box and software stack provides all protocols and features, even if management of the single system is not perfectly cohesive.

NetApp’s FAS storage systems are an example of this strategy.  A single filer provides all services whether SAN or NAS, IP or FiberChannel.  However, a single HA cluster is actually managed as two separate systems, each cluster node is managed independently using independent FilerView instances and there are separate tools (NetApp System Manager, Operations Manager, Provisioning Manager, Protection Manager) that can bring all of the filer heads into one view.  Disks are captive to a specific filer head in a cluster and moving disks and/or volumes between filer heads is not seamless.

Single Point of Management Approach:

Others approach it more holistically and figure that as long as the customer manages it as a single system, it qualifies as “Unified”, even if there may be disparate hardware and software components providing the different services.  After all, once it’s installed you don’t really go in the datacenter to physically look at the hardware very often.

EMC’s Unified Storage (which is a combination of Celerra NAS and Clariion Block storage systems) is an example of this.  In a best-of-breed approach, EMC allows the Clariion backend to do what it does best, block storage via FC or IP, while the Celerra, which is purpose built for NAS, provides CIFS/NFS services while leveraging the disk capacity, processors, cache, and other features of the Clariion as a kind of offload engine.  Regardless of which services you use, all parts of the solution are managed from a single Unisphere instance, including other Clariions and/or Celerras in the environment.  Unisphere launches from any Clariion or Celerra management port, and regardless of which device you launch it from, all systems are manageable together.

Which approach is better?

I see advantages and disadvantages to both approaches, as a former admin of both NetApp and EMC storage, I feel that while NetApp’s hardware and software stack is unified, their management stack is decidedly un-unified.  EMC’s Unified storage is physically “integrated” to work together as a system, but the unifying feature is the management infrastructure built-in with Unisphere.

There are other advantages to EMCs approach as well.  For example, if a particular workload seems to hammer the CPUs on the NAS but the backend is not a bottleneck, more Celerra datamovers can be added to take advantage of the same backend disks and improve front end performance.  Likewise, the backend can be augmented as needed to improve performance, increase capacity, etc without having to scale up the front end NAS head.  With the NetApp approach, if your CPU or cache is stressed, you need to deploy more FAS systems (in pairs for HA) along with any required disks for that new system to store data.

Both approaches work, and both have their merits, but what do customers really want?

In my opinion, most customers don’t really care *how* the hardware works, so long as it DOES WORK, and is easy to manage.  In the grand scheme of things, if I, as an admin, can provision, replicate, snapshot, and clone storage across my entire environment, regardless of protocol,  from a “single pane of glass”, that is a strong positive.

EMC Unisphere makes it easy to do just that and it launches right from the array with no separate installation or servers required.  Unisphere can authenticate against Active Directory or LDAP and has role-based-administration built in.  And since Unisphere launches from any Clariion Storage processor or Celerra Control Station, there’s no single point of failure for storage management either.

So what do you think customers want?  If you are a customer, what do YOU want?

NetApp and EMC: Startup and First Impressions

Posted on by

In the last post, I talked about a project I am involved in right now to deploy NetApp storage alongside EMC for SAN and NAS.  Today, I’m going to talk about my first impressions of the NetApp during deployment and initial configuration.

First Impressions

I’m going to be pretty blunt — I have been working with EMC hardware and software for a while now, and I’m generally happy with the usability of their GUIs.  Over that time, I’ve used several major revisions of Navisphere Manager and Celerra Manager, and even more minor revisions, and I’ve never actually found a UI bug.  To be clear, EMC, IBM, NetApp, HDS, and every other vendor have bugs in their software, and they all do what they can to find and fix them quickly, but I just haven’t personally seen one in the EMC UIs despite using every feature offered by those systems. (I have come across bugs in the firmware)

Contrast that with the first day using the new NetApp, running the latest 7.3.1.1L1 code, where we discovered a UI problem in the first 10 minutes.  When attempting to add disks to an aggregate in FilerView, we could not select FC disk to add.  We could, however, add SATA disk to the FC aggregate.  The only way to get around the issue was to use the CLI via SSH.  As I mentioned in my previous post, our NetApp is actually an IBM nSeries, and IBM claims they perform additional QC before their customers get new NetApp code.

Shortly after that, we found a second UI issue in FilerView.  When creating a new Initiator group, FilerView populates the initiator list with the WWNs that have logged in to it.  Auto-populating is nice but the problem is that FilerView was incorrectly parsing the WWN of the server HBAs and populating the list with NodeWWNs rather than PortWWNs.  We spent several hours trying to figure out why the ESX servers didn’t see any LUNs before we realized that the WWNs in the Initiator group were incorrect.  Editing the 2nd digit on each one fixed the problem.

I find it interesting that these issues, which seemed easy to discover, made it through the QC process of two organizations.  ONTap 7.3.2RC1 is available now, but I don’t know if these issues were addressed.

Manageability

As far as FilerView goes, it is generally easy to use once you know how NetApp systems are provisioned.  The biggest drawback in an HA-Filer setup is the fact you have to open FilerView separately for each Filer and configure each one as a separate storage system.  Two HA-Filer pairs? Four FilerView windows.  If you include the initial launch page that comes up before you get to the actual FilerView window, you double the number of browser windows open to manage your systems.  NetApp likes to mention that they have unified management for NAS and SAN where EMC has two separate platforms, each with their own management tools. EMC treats the two storage processors (SPs) in a Clariion in a much more unified manner, and provisioning is done against the entire Clariion, not per SP.  Further, Navisphere can manage many Clariions in the same UI.  Celerra Manager acts similarly for EMC NAS.  Six of one, half a dozen of the other some say, except that I find that I generally provision NAS storage and SAN storage at different times, and I’d rather have all of the controllers/filers in the same window than NAS and SAN in the same window.  Just my preference.

I should mention, NetApp recently released System Manager 1.0 as a free download.  This new admin tool does present all of the controllers in one view and may end up being a much better tool than FilerView.  For now, it’s missing too many features to be used 100% of the time and it’s Windows only since it’s based on MMC.  Which brings me to my other problem with managing the NetApp.  Neither FilerView nor System Manager can actually do everything you might need to do, and that means you end up in the CLI, FREQUENTLY.  I’m comfortable with CLIs and they are extremely powerful for troubleshooting problems, and especially for scripting batch changes, but I don’t like to be forced into the CLI for general administration.  GUI based management helps prevent possibly crippling typos and can make visualizing your environment easier.  During deployment, we kept going back and forth between FilerView and CLI to configure different things.  Further, since we were using MultiStore (vFilers) for CIFS shares and disaster recovery, we were stuck in the CLI almost entirely because System Manager can’t even see vFilers, and FilerView can only create them and attach volumes.

Had I not been managing Celerra and Clariion for so long, I probably wouldn’t have noticed the above problems.  After several years of configuring CIFS, NFS, iSCSI, Virtual DataMovers, IP Interfaces, Snapshots, Replication, and DR Failover, etc. on Celerra, as well as literally thousands of LUNs for hundreds of servers on Clariion, I don’t recall EVER being forced to use the CLI.  CelerraCLI and NaviCLI are very powerful, and I have written many scripts leveraging them, and I’ll use CLI when troubleshooting an issue.  But for every single feature I’ve ever used on the Celerra or Clarrion, I was able to completely configure from start to finish using the GUI.  Installing a Celerra from scratch even uses a GUI based installation wizard.  Comparing Clariion Storage Groups with NetApp Initiator groups and LUN maps isn’t even fair.  For MS Exchange, I mapped about 50 LUNs to the ESX cluster, which took about 30 minutes in FilerView.  On the Clariion, the same operation is done by just editing the Storage Group and checking each LUN, taking only a couple minutes for the entire process.

Now, all of the above commentary has to do with the management tools, UIs, and to some degree personal preferences, and does not have any bearing on the equipment or underlying functionality.  There are, of course, optional management tools like Operations Manager, Provisioning Manager, and Protection Manager available from NetApp, just as there is Control Center from EMC (which incidentally can monitor the NetApp) or Command Central from Symantec.  Depending on your overall needs, you may want to look at optional management tools; or, FilerView may be perfectly fine.

In the next post,  I’ll get into more specifics about how the Exchange 2007 CCR cluster turned out in this new environment, along with some notes on making CCR truly redundant.  I’ve also been working on the NAS side of the project, so I’ll also post about that some time soon.

NetApp and EMC: Real world comparisons

Posted on by

I’ve been tasked recently on a project to increase availability of applications through the use of multiple/disparate storage systems.  This environment has heavily invested in EMC Clariion and Celerra storage systems over the past few years and needed a non-EMC platform from which to build the second half of a redundant storage environment.  For various reasons I won’t go into here, we chose IBM nSeries as that second platform. (Since the IBM system is rebranded NetApp FAS, I will refer to this as a NetApp filer.)  I’ve been working on implementing the new equipment as well as integrating it into the Business Continuity strategy.

The overall strategy is to continue to use the EMC Clariion/Celerra systems for production and disaster recovery replication and split applications between and across the two storage platforms for local redundancy.  The NetApp will also perform disaster recovery replication for some of the applications.  Here’s a really simple diagram that might help if the description is confusing:

EMC and NetApp Redundancy

EMC and NetApp Redundancy

Now this may sound easy, but it is, in fact, NOT straightforward.  This strategy requires close coordination with application owners and careful planning.  As we move forward on this project, I’ll talk about various idiosyncrasies, caveats, and problems we’ve faced, how we got around them, and I’ll also talk a lot about the differences between the Clariion/Celerra and NetApp platforms’ features and functionality, application support, and manageability.  These comparisons will include using both systems with FiberChannel connections as well as CIFS/NFS NAS, all in conjunction with DR replication and failover.

To start off, I figure we should compare some of the terminology between EMC and NetApp systems.  Some terms don’t directly translate, but I matched them up as close as I could and noted where there is no equivalent.   Below are two tables: one for Block Storage, and the other for NAS Storage.  Click on them to see full size versions.

EMC-NetApp Block Storage Terminology table

EMC-NetApp Block Storage Terminology

EMC-NetApp NAS Storage Terminology

EMC-NetApp NAS Storage Terminology

In the next update, I’ll start talking about the deployment itself.  The point of these articles is to discuss the differences, advantages, and disadvantages of each platform so that you can understand how each one might work in your environment.  I do not intend to disparage either platform or vendor.  I will try to be vendor agnostic as much as possible, and I do feel like I have a somewhat unique position of comparing new and recent hardware and firmware from both vendors, in the same production capacities, simultaneously, in the same environment.  I am NOT comparing old ONTap code to new FLARE/DART code or vise-versa, nor am I comparing old Clariion CX hardware to new NetApp/IBM hardware, etc.

Stay tuned!